This product, as most of our products, requires an experienced, professional to install.  If you are a qualified electrician and unfamiliar with this product, contact us for training and certification options. If you are the customer and have an electrician in mind, ask them to contact us for training and certification options.

FOR LARGE PANEL DELIVERY TIMES, SCHEDULES AND COSTS - CLICK HERE

AIKO-A455-MAH54Mb AIKO’s All-Black 54-cell gen 2 panels are a result of cutting-edge technology and deliver a fantastic 22.8% efficiency. These sleek panels feature a blacked-out effect and bezel-less edge to provide a stylish edge to the panel’s overall design. AIKO’s 54 cell panels are perfect for residential builds looking for the highest efficiency available. Up to 23.1% Efficiency 440W-460W Maximum System Voltage: DC1500V  Panel Rating (455W) Efficiency: 22.8% Cable Length: 1.2m Connector: Staubli MC4 EVO2 Product Warranty: 25 Years Performance Warranty: 30 Years  

The SunSynk 8.8kW AC ECCO kWp Inverter is the next generation of super hybrid inverter with a 10400W MPPT and a rated AC output of 8.8kW resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as; Dual MPPT design  Compatible with Lithium-ion batteries and Lead Acid batteries Up to 50kWh battery pack 5yr warranty as standard IP65 rated Anti-islanding protection Fully programmable power export Automatic switching from Grid-Tied to Off-Grid mode Up to 16 units with the same firmware can be paralleled  Adding a Sunsynk battery to your existing inverter will extend the inverter warranty to 10 years. This must be done within 3 months of the original installation for eligibility. If done later than this, the battery will be registered separately at 10 years, and the inverter maintains a 5 year warranty. Installations with Sunsynk products now need to be registered here to gain full activation of the warranty.   SEG (smart Energy Guarantee) with integration to Octopuse Energy on the Sunsynk app Smart energy

Solis new 5G Hybrid inverter range that supprt power for important loads during load shedding as well as saving power during peak demands. Making this the ideal solution you always wanted.  NB: This product is not suitable for use with Lead acid/Lead Carbon batteries and although supported, will not be covered under the European warranty. The Solis inverter is not able to accurately monitor the state of charge for lead acid batteries. Product Features Fanless design IP65 High charge and discharge efficiency Multiple work modes resulting in max self-consumption Intelligent  BMS function 24 hour real-time intelligent energy management  Remotely control & upgrade

  Pylon US5000 4.8kWh Li-Ion Solar Battery 48V (excl. brackets) A new battery in the US series from Pylontech. The US5000 is a 48V battery with incredible features to provide a competitive edge in the market.  Please use a dimension of 4U per module when sizing a cabinet for these batteries. Product Features Modular design for ease of expansion Higher usable capacity resulting in less battery modules installed Usable capacity 4 560Wh Parallel Capability of up to 16 units Allows for large installation of up to 72.96kWh with no LV Hub Intelligent BMS protecting battery cells 95% DoD with more usable capacity RS485 and CAN compatible Comes with a 5-year warranty extendable Long cycle life and superior performance Compatible with tier 1 inverter brands   If you want to use these batteries with Victron equipment please read this article to select the correct equipment: https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom   Here is the link to register your batteries and receive extended warranty: https://en.pylontech.com.cn/service/registration  

S48-100LFP ESS Rolls S-Series 48-volt Lithium Iron Phosphate (LFP/LiFePO 4) Energy Storage System (ESS) batteries are designed for use in larger-scale, 48V (51.2V nominal) systems, for grid-connected backup and off-grid purposes. Rolls S-Series 48V LFP ESS batteries are designed to scale in parallel capacity only at this voltage level, with communication between batteries and to externally connected equipment. Design 19′′ 4U rack-compatible Up to 16 parallel connectivity Integrated screen & controls State-of-charge (SOC) indication CAN bus & RS-485 connectivity External breaker access Separate BMS breaker PC Connectivity Optional Rolls ESS modular cabinet (Install up to 8 units per cabinet) Battery Management System (BMS) Integrated hardware BMS inside Independent charge & discharge protection, secondary protection Short-Circuit Protection Over-Voltage Protection Low-Voltage Protection Over-Current Protection Low-Temperature Protection Over-Temperature Protection The below link is to download the Rolls PC software for direct communication with the batteries: https://www.rollsbattery.com/resource/rolls-lfp-desktop/

The SUNSYNK-L5.3 Battery is the ideal storage solution for residential applications. The battery utilises LifePO4 chemistry and boasts an IP65 rated enclosure. Up to 32 batteries can be connected in parallel for a maximum capacity of 170kWh. (Compatible with L5.1 and G5.3 models but not BYD 5.32kwh or CATL 5.12kwh) Included: Battery isolator Battery to inverter & Battery to battery cable Wall bracket   

The Fogstar Energy 15.5kWh Battery offers a unique blend of advanced technology and long-lasting durability with an 8 year warranty! Unmatched Performance and Reliability Intelligent Heating: Operates efficiently even in cold climates (down to -20°C) thanks to an automatic heating system that activates at 5°C. Seamless Inverter Compatibility: Works effortlessly with various popular inverters (Victron, Pylontech, Growatt, Sofar, Solis, Goodwe) through the pre-loaded PACE BMS. Simply adjust inverter settings on the user-friendly touchscreen, no complex software needed. Industry-Leading Warranty: Backed by an 8-year warranty and a 15-year shelf-life, showcasing our commitment to exceptional product, and component quality. User-Friendly Design and Advanced Features Intuitive Touchscreen: Monitor system status and adjust settings easily with the 4.3-inch TFT LCD touchscreen. Energy-Saving Sleep Mode: The touchscreen automatically enters sleep mode when not in use, preserving energy while offering instant access to information upon activation. Premium Battery Cells: Equipped with 16 Grade A EVE LF304 cells, known for their remarkable lifespan (>3500 cycles at 200A discharge). Active Cell Balancing: Ensures optimal performance and longevity through a 2A JK Active Balancer that maintains cell health during charging. Scalability and Safety Expandable Storage: Connect up to 15 batteries in parallel to increase your energy storage capacity as needed. Enhanced Safety: Each battery comes with a 250A DC breaker that automatically cuts off power in case of faults, safeguarding your system. Convenient Portability: Despite its weight (140kg), the battery's wheels allow for easy movement during installation or maintenance. Suitable for Homes and Businesses Ideal for both residential and commercial applications: Whether you have a solar energy system or simply want to take advantage of overnight electricity tariffs, this battery allows you to store excess energy for later use, reducing reliance on the grid and potentially lowering your electricity bills. What's Included: A Fogstar Energy 15.5kWh Battery Wall bracket (if required and ordered) PC communication cable RS232 to USB 1.5m power cables with M8 Terminal Ring Ordering more than one? We'll also send you: Battery to Battery (B2B) communication cables (RS485 to RS485). FAQs Q: How many batteries can I connect together? A: You can connect up to 15 units in parallel. Q: What inverter brands does the PACE BMS work with? A: The BMS supports various inverters like Victron, Pylontech, Growatt, etc., but inverter integration is not required for the batteries to function. Why have we used PACE in our 48V Batteries? When we were in the design stages of our rack system and looking at BMS solutions, our initial instinct (like many system designers on the market) was to ‘just go with’ JBD or JK. There’s something quite reassuring and rather copacetic about using a BMS so well recognised and established in the Global market.  Although, when you start digging a little deeper into the specifications of these BMS, it was unlikely the most popular BMS could handle all of the requirements we were looking for. The core element for us was the multi-inverter protocol. The ease of integration was key to the functionality of our batteries, this is where many battery manufacturers on the market had gone wrong. Nobody wants to be spending hours re-programming the BMS to ‘play nice’ with their Inverter. PACE gave us the opportunity to implement a multi-inverter protocol that was unsupported by many BMS manufacturers. Our mind was made up when we received a frustrated email from a customer saying they were having ‘major issues’ getting their BMS to integrate succinctly with their Victron Inverter. Yes - we know those challenges and we understand the frustrations. That customer was not the first, and they certainly wouldn't be the last. Not only have we found a superb supplier of quality BMS overflowing with protective features, they also solve the issue of effortless inverter communication - allowing users to simply ‘plug and go’ for the top inverter brands on the market. For those of you not using one of these inverters (Victron, Sofar, Pylontech, Growatt, Solis, Goodwe), you still have the option to pull out the Pbms Tools software and input your BMS settings as required.  Q: How do I connect the battery to a Victron inverter? (Optional) A: You'll need a separate Victron Cerbo GX and a type B Victron battery BMS to VE CAN cable. The battery connects to the Cerbo GX, which then connects to your inverter using a VE.BUS cable. Q: What are the dimensions of the 15.5kWh battery? A: The battery is 500mm wide, 230mm long, and 830mm tall (excluding wheels). With wheels, the height increases by 100mm. Dimensions of the battery ready for shipping are:  L- 98.5cm, H- 40cm and W- 57cm. These dimensions are slightly bigger than above as these include the crate and packaging that the battery will be delivered in.   They are delivered in a crate that is attached to a pallet. Q: Can I use your battery with other brands? A: No, Fogstar batteries are not compatible with other brands due to potential differences in power, size, and system compatibility. Q: Why isn't Fogstar on my inverter's "approved list"? A: Fogstar believes these inverter lists limit consumer choice and restrict competition. They prioritise making batteries accessible and view these lists as hindering industry-wide progress. While they may not be officially "approved," the batteries are still be compatible in most instances. Q: Does self-installation void the warranty? A: No, self-installation does not affect your warranty. Q: How does the automatic heating work? A: When temperatures drop below 5°C, the battery automatically activates its internal heating system. This allows it to charge and perform optimally even in cold environments as low as -20°C, ensuring reliable operation in various climates. Q: How does the battery arrive? A: The 15.5kWh battery arrives in a plywood container that may require panel disassembly for easier access. Safety Precautions Q: How many people are needed to lift the battery? A: Due to its weight (140kg), at least six people are required to lift the battery safely, adhering to all safety regulations. Q: What safety measures should I take when moving the battery on wheels? A: Use caution to prevent tipping. Ensure stability during movement and use the levelling pads, not the wheels, to support the weight. Wall Mounting Q: Can I wall mount the battery? A: Yes, but it's crucial to consider the following: Wall material: Use appropriate fixings designed for the specific wall material (drywall, concrete, brick, wood stud). Wall strength: Ensure the wall can support the combined weight of the battery and mounting bracket. Doubling up studs or adding reinforcement might be necessary. Professional consultation: It's highly recommended to consult a structural engineer or qualified contractor to determine the best and safest mounting method for your specific wall. Q: What should I do with the wheels after wall mounting? A: You can remove the wheels for wall mounting, but remember to reinstall the bolts afterward to prevent dust and insect entry. Setting Up Your Battery Q: How long does it take to set up the battery? A: The basic installation process for a one-battery system should take approximately 20 minutes.  Warranty Fogstar Energy warrants the Fogstar Energy 48V 15.5kWh ("Product") to be free from defects in cells, BMS and workmanship for a period of eight (8) years from the date of purchase ("Warranty Period"). What is Covered: This warranty covers the repair or replacement of any defective parts of the Product during the Warranty Period, at Fogstar's sole discretion. What is Not Covered: This warranty does not cover: Damages caused by: Gross negligence Normal wear and tear Accident or collision Abuse or misuse Incorrect installation Acts of God (e.g., lightning, flood, fire) Any disassembly or modifications to the Product not made by Fogstar or its authorised representatives Alterations or modifications to the Product not made by Fogstar or its authorised representatives. Any claims made after the Warranty Period has expired Transportation costs associated with returning the Product for warranty service Installation or removal costs of the Product Any consequential or incidental damages, including but not limited to, loss of use, loss of data, or lost profits Repair or Replacement: In the first instance, Fogstar will attempt to troubleshoot and repair any issues with the Product before resorting to replacement. If repair is not feasible, Fogstar will, at its sole discretion, replace the Product with a new or refurbished unit of equal or greater value. Refurbished units will be of equivalent functionality and performance to a new unit and will have undergone rigorous testing to ensure compliance with warranty standards. NB: we have been informed by Fogstar that when using the battery with a Victron Cerbo-GX, you should use a Type B cable for canbus communication We have also been informed that the battery will work with Sunsynk hybrid inverters if you set the inverter profile to Pylontech, Canbus BMS communication would then be via the provided yellow comms cable.

For panel attributes please see full listing

The MT52 remote meter, compatible with controllers featuring RS485 communication, enables real-time monitoring of the controller's operation and parameter programming. Key features include easy installation and operation, real-time display of fault alarms, local reading of parameters, direct power supply from the controller, and an RJ45 communication port. Self-consumption Backlight ON<23mA Backlight OFF<15mA   Faceplate dimension 98mm × 98mm Frame dimension 114mm × 114mm Communication port RJ45 Communication cable (m) Standard: 2m, Longest: 50 m Net weight Simple package: 0.23 Kg Standard package: 0.32kg   Environment temperature -20℃~+70℃ Optional Meter for AN, BN, CN, XTRA MPPT charge controllers.  DuoRacer requires the MT11, see separate listings. Comes with 2m RJ45 cable in the box, if you need longer we have a 5m cable here 5m RJ45 Cable for MT52 PLEASE NOTE - YOU CANNOT USE THE MT52 AT THE SAME TIME AS THE OPTIONAL ADAPTORS Use with lithium batteries:  The MT52 ( sv 2.18 version) can be used to program a lithium battery for our XTRA controllers. However it cannot do this for the Tracer-AN 60A and 100A. You must use a PC cable and software for programming lithium.  

New XTRA series - G3-BLE *NEW* Integrated Bluetooth NOTE - The MT50 display unit does not work with this model, you need the MT52 instead. For 12V Solar System: 520W solar panel (150V for max input voltage) For 24V Solar System: 1040W solar panel (150V for max input voltage) For 36V Solar System: 1560W solar panel (150V for max input voltage) For 48V Solar System: 2080W solar panel (150V for max input voltage) Introducing the XTRA-N G3/XTRA-N G3 BLE series controllers—a cutting-edge solar charge control solution. With a built-in Bluetooth module for easy mobile app parameter control, advanced MPPT algorithms for efficient energy tracking, and features like independent voltage regulation and comprehensive electronic protections, these controllers provide a reliable and durable solution for a variety of solar applications, from RVs to household systems. Upgrade your solar experience with the XTRA-N G3 series. High quality and low failure rate components of ST or IR to ensure the service life Advanced MPPT technology & ultra-fast tracking speed, tracking efficiency is up to 99.5% Maximum DC/DC transfer efficiency is as high as 98.5%; full load efficiency is up to 97.2% Advanced MPPT control algorithm to minimize the lost rate and lost time Accurate recognizing and tracking of multi-peaks maximum power point Wider MPP(maximum power point) running voltage to optimize PV utilization Support multi battery types including lithium batteries Equipped with a stable self-activation function for the lithium battery Set the battery voltage parameters on the LCD Battery temperature compensation Limit the charging power & charging current to no higher than the rated value Real-time energy statistics function Charging power reduction automatically for over-temperature Built-in Bluetooth to adjust settings through EPEVER APP RS485 communication interface with optional 4G or Wi-Fi modules for remote monitoring Setting parameters via the PC software, APP, or remote meter Constant voltage output function Comprehensive electronic protections Multiple load work modes Dustproof and waterproof design with IP33 enclosure Low self-consumption, lower than 10mA Operation at full load without charging power reduced in the working temperature range

New XTRA series - G3-BLE *NEW* Integrated Bluetooth NOTE - The MT50 display unit does not work with this model, you need the MT52 instead. For 12V Solar System: 260W solar panel (100V for max input voltage) For 24V Solar System: 520W solar panel (100V for max input voltage) Introducing the XTRA-N G3/XTRA-N G3 BLE series controllers—a cutting-edge solar charge control solution. With a built-in Bluetooth module for easy mobile app parameter control, advanced MPPT algorithms for efficient energy tracking, and features like independent voltage regulation and comprehensive electronic protections, these controllers provide a reliable and durable solution for a variety of solar applications, from RVs to household systems. Upgrade your solar experience with the XTRA-N G3 series. High quality and low failure rate components of ST or IR to ensure the service life Advanced MPPT technology & ultra-fast tracking speed, tracking efficiency is up to 99.5% Maximum DC/DC transfer efficiency is as high as 98.5%; full load efficiency is up to 97.2% Advanced MPPT control algorithm to minimize the lost rate and lost time Accurate recognizing and tracking of multi-peaks maximum power point Wider MPP(maximum power point) running voltage to optimize PV utilization Support multi battery types including lithium batteries Equipped with a stable self-activation function for the lithium battery Set the battery voltage parameters on the LCD Battery temperature compensation Limit the charging power & charging current to no higher than the rated value Real-time energy statistics function Charging power reduction automatically for over-temperature Built-in Bluetooth to adjust settings through EPEVER APP RS485 communication interface with optional 4G or Wi-Fi modules for remote monitoring Setting parameters via the PC software, APP, or remote meter Constant voltage output function Comprehensive electronic protections Multiple load work modes Dustproof and waterproof design with IP33 enclosure Low self-consumption, lower than 10mA Operation at full load without charging power reduced in the working temperature range

New XTRA series - G3-BLE *NEW* Integrated Bluetooth NOTE - The MT50 display unit does not work with this model, you need the MT52 instead. For 12V Solar System: 390W solar panel (100V for max input voltage) For 24V Solar System: 780W solar panel (100V for max input voltage) Introducing the XTRA-N G3/XTRA-N G3 BLE series controllers—a cutting-edge solar charge control solution. With a built-in Bluetooth module for easy mobile app parameter control, advanced MPPT algorithms for efficient energy tracking, and features like independent voltage regulation and comprehensive electronic protections, these controllers provide a reliable and durable solution for a variety of solar applications, from RVs to household systems. Upgrade your solar experience with the XTRA-N G3 series. High quality and low failure rate components of ST or IR to ensure the service life Advanced MPPT technology & ultra-fast tracking speed, tracking efficiency is up to 99.5% Maximum DC/DC transfer efficiency is as high as 98.5%; full load efficiency is up to 97.2% Advanced MPPT control algorithm to minimize the lost rate and lost time Accurate recognizing and tracking of multi-peaks maximum power point Wider MPP(maximum power point) running voltage to optimize PV utilization Support multi battery types including lithium batteries Equipped with a stable self-activation function for the lithium battery Set the battery voltage parameters on the LCD Battery temperature compensation Limit the charging power & charging current to no higher than the rated value Real-time energy statistics function Charging power reduction automatically for over-temperature Built-in Bluetooth to adjust settings through EPEVER APP RS485 communication interface with optional 4G or Wi-Fi modules for remote monitoring Setting parameters via the PC software, APP, or remote meter Constant voltage output function Comprehensive electronic protections Multiple load work modes Dustproof and waterproof design with IP33 enclosure Low self-consumption, lower than 10mA Operation at full load without charging power reduced in the working temperature range

New XTRA series - G3-BLE *NEW* Integrated Bluetooth NOTE - The MT50 display unit does not work with this model, you need the MT52 instead. For 12V Solar System: 520W solar panel (150V for max input voltage) For 24V Solar System: 1040W solar panel (150V for max input voltage) Introducing the XTRA-N G3/XTRA-N G3 BLE series controllers—a cutting-edge solar charge control solution. With a built-in Bluetooth module for easy mobile app parameter control, advanced MPPT algorithms for efficient energy tracking, and features like independent voltage regulation and comprehensive electronic protections, these controllers provide a reliable and durable solution for a variety of solar applications, from RVs to household systems. Upgrade your solar experience with the XTRA-N G3 series. High quality and low failure rate components of ST or IR to ensure the service life Advanced MPPT technology & ultra-fast tracking speed, tracking efficiency is up to 99.5% Maximum DC/DC transfer efficiency is as high as 98.5%; full load efficiency is up to 97.2% Advanced MPPT control algorithm to minimize the lost rate and lost time Accurate recognizing and tracking of multi-peaks maximum power point Wider MPP(maximum power point) running voltage to optimize PV utilization Support multi battery types including lithium batteries Equipped with a stable self-activation function for the lithium battery Set the battery voltage parameters on the LCD Battery temperature compensation Limit the charging power & charging current to no higher than the rated value Real-time energy statistics function Charging power reduction automatically for over-temperature Built-in Bluetooth to adjust settings through EPEVER APP RS485 communication interface with optional 4G or Wi-Fi modules for remote monitoring Setting parameters via the PC software, APP, or remote meter Constant voltage output function Comprehensive electronic protections Multiple load work modes Dustproof and waterproof design with IP33 enclosure Low self-consumption, lower than 10mA Operation at full load without charging power reduced in the working temperature range

The crimp-free Stäubli PV connector: MC4-Evo ready The Original MC4 product portfolio now offers a PV connector with the easy-to-use snap-in technology. This PV DC connector is quick to install as it enables crimp-free assembly without the need for special tools. The reduced complexity of the assembly process allows to save time while granting Stäubli quality. The MC4-Evo ready is mateable with the Stäubli Original MC4 product portfolio as proved by TÜV Rheinland interoperability test with triple test severity. CLICK HERE for instruction video from Stäubli Safe connections: quick and easy installed The crimp-free Original MC4-Evo ready complements the Stäubli PV DC product range of cable couplers for in-string and homerun connections. The new connector provides safe connections that are quick and easily installed for long-term reliability. No crimping tools - Quick assembly with easy snap-in technology, Reliable connection, TÜV Rheinland certified Product Main Features Crimp-free cable connection: no crimping necessary, the contact is made by an automatically closing spring clamp based on snap-in technology No single parts. The connectors are complete and pre-screwed: Insert the stripped PV wire, screw on the housing: done! Mateable with Original MC4 product portfolio   Technical data   Rated voltage DC 1500 V Rated current 30 A Type of connection Spring clamp (tool-free connection) Cable cross-sections 4 mm² and 6 mm²  Outer cable diameter 5.4 – 7.6 mm Ambient temperature range -40 °C ... +85 °C (IEC) Upper limit temperature 115 °C (IEC) Fire protection class UL94-V0 Insulation material PA Certified by TÜV Rheinland according to IEC IEC 62852:2014+Amd. 1:2020

OPEN BOX SALE - opened return, never used. Product code - LYN060102000 The Lynx Distributor contains a positive and a negative busbar. The positive busbar has four fuse-protected connections with fuse monitoring. The negative busbar has four connections and a ground connection. It is part of the Lynx Distribution system and is available in two versions, with M8 or M10 busbar. Note that M10 refers to the busbar connection joints where the modules are connected to each other. The fuse and cable connections are always M8. The Lynx Distributor has a power LED and four fuse status indication LEDs. If connected to a Lynx Smart BMS, up to 4 Lynx Distributors can send fuse status information to the Lynx Smart BMS. This feature is not available when connected to a Lynx Shunt VE.Can. *This listing is for the M8 version.* It will monitor the status of each fuse and indicate its condition with a LED if used in conjunction with Lynx Shunt VE Can. The Lynx Distributor is part of the modular Lynx distribution system. See here for the Lynx Power In bus bar https://www.bimblesolar.com/Victron-lynx-powerin

OPEN BOX SALE - opened but never used Product Code - BAT512050610 Victron range of small Lithium batteries for small off grid set-ups that want to use Lithium batteries.  Ideal for light weight solutions.  70% small and 70% lighter than Lead acid batteries. For multiple batteries it is imperative that you purchase the BMS, Battery Management System, to go with these batteries.  You will kill them quickly if you don’t use one.  We have the BMS here. Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series. These batteries have integrated Cell Balancing, Temperature and Voltage control (BTV). Up to ten batteries can be paralleled and up to four batteries can be series connected (BTV’s are simply daisy-chained) so that a 48V battery bank of up to 2000Ah can be assembled.  The daisy-chained BTV’s must be connected to a Victron battery management system (BMS). Download full spec sheet here